RFID HF Module with TTL Interface
HF | NFC Embedded Module – M900
– RFID HF | NFC: 13.56 MHz
– External U.FL Antenna
– Supports all MIFARE® ICs
– Integrated TTL Interface
– Adopt ARM MCU Solutions
– Optional available on Tape & Reel
 |
RFID HF | NFC: 13.56 MHz | |
 |
Standard ISO 14443A/B, ISO 15693, ISO 18092, ISO 18000-3M3 | |
 |
Integrated TTL Interface | |
 |
External U.FL Antenna | |
 |
Full MIFARE® Support | |
|
Single-sided Laying Components | |
|
Tape & Reel available for SMD Production |
| ELECTRICAL SPECIFICATIONS | ||||
| Power Supply: | μC: 3.3 V, RFID IC: 3.3 ~ 5 Vdc | |||
| Power Consumption: | < 100 mA, standby current; < 1 mA (low power mode) | |||
| Operating Frequency: | 13.56 MHz | |||
| Reading Distance: | up to 10 cm* | |||
| Antenna: | external* | |||
| Baudrate: | 9600…115200 bit/s | |||
| Antenna Connector: | U.FL | |||
| Interface: | TTL | |||
| Connector: | Molex PicoBlade 53261 (PCB) 51021 (cable) | |||
| PCB Connections: | Soldering Pads (Suitable for SMD Production) | |||
| MECHANICAL SPECIFICATIONS | ||||
| Dimensions: | 25 × 16.5 × 2.8 mm | |||
| Material: | FR4, Blue | |||
| Weight: | 3 g | |||
| Mounting Option: | Soldering | |||
| ENVIRONMENTAL CONDITIONS | ||||
| Operating Temperature: | -20 °C to +80 °C | |||
| Storage Temperature: | -40 °C to +85 °C | |||
| Humidity: | up to 95 % non-condensing | |||
| MTBF: | 200’000 h | |||
| SUPPORTED STANDARDS | TAGS | ||||
|
ISO 14443 A
and compatible:
|
Read/write:
MIFARE® Classic Mini / 1K /4K, MIFARE Ultralight®,
MIFARE Ultralight® C, MIFARE Ultralight® Nano,
MIFARE® DESFire®EV1, MIFARE® DESFire Light,
MIFARE® Smart MX, MIFARE® Plus S / X,
MIFARE® Pro X, NTAG 21x, NTAG 424
Read UID only: Read UID only of all other ISO14443A RFID tags
|
|||
|
ISO 14443 B
and compatible:
|
SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176 | |||
|
ISO 15693
and compatible:
|
EM4135, EM4043, EM4x33, EM4x35, I-Code SLI/SLIX/DNA,
M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity)
|
|||
|
ISO 18000-3M3
and compatible:
|
I-Code ILT-M | |||
| SDK INFORMATION | ||||
| Supported OS: | Windows 7, 8, 8.1, 10 | |||
| Supported Languages: | C++, Binary command protocol | |||
| Demo Software: | Windows | |||
| APPLICABLE STANDARDS | ||||
| EMC: | EN 301489-1:2012-04 (v1.9.21), EN 301489-3:2013-12 (V1.6.1) | |||
| Radio Regulation: | EN 300330-1:2015-08 (V1.8.1), EN 300330-2:2015-08 (V1.6.1) | |||
| Safety: | EN 60950-1:2014-08, EN 62369-1:2010-03, EN 50364:2010-11 | |||
| RED: | 2014/53/EU | |||
| RoHS 2: | 2011/65/EU | |||
| REACH: | 1907/2006 | |||
| Certificates: | FCC, CE, IC** | |||
*Reading Distance depends on Tag, Antenna and Environmental Conditions.
**Only available for some Versions.
RFID HF | NFC Embedded Module – M900 is compatible with the standards ISO 14443A/B, ISO 15693, ISO 18092 and ISO 18000-3.
The small size and single-sided components allow space-saving embedding of RFID in many different applications and devices.
The RFID HF | NFC Embedded Module – M900 is available as DESFire, HF and MIFARE version.
The RFID HF | NFC Embedded Module – M900 has an external antenna connector.
We offer a large selection of suitable RFID antennas, which are specially adapted to the application.
DESFire compatible M900 RFID module is equipped with TTL interface. In low power mode it consumes less than 1 mA.
A helpful software development kit for developing your own applications and operations is available for download.
NEW! Tape & Reel for SMD Productions
iDTRONIC, the leading manufacturer of embedded RFID products in Germany, now delivers the RFID HF | NFC Embedded Module – M900 on a tape & Reel roll. This SMD solution was developed to simplify large-volume production of electronics with RFID components. It is ideally suited for industry 4.0 applications in highly automated production environments.
► Demo Software Introduction:
► Application Areas
 |
Access Control | |
 |
Ticketing | |
 |
Mobile Computers | |
 |
SMD Productions | |
 |
Laboratory Diagnostics |
Send your inquiry to: info@idtronic-rfid.com
Or contact us with our contact form: