Compact RFID Reader with M12 and RJ45 Connector
RFID Reader HF IP67
– RFID HF | NFC
– ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2
– Integrated Antenna or External SMA Antenna
– Ethernet RJ45 Interface
– Supports Windows Systems
 |
HF | NFC: 13.56 MHz | |
 |
Supports ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2, HID iClass | |
 |
Integrated Antenna or External SMA Antenna | |
 |
Ethernet (RJ45) Interface | |
 |
Solution for Applications in Near-Field Environments with short Reading Ranges | |
 |
Including SDK | |
 |
IP67 Protection Class | |
|
Integration in Machines for Quality Controls | |
|
Supports Windows Systems |
| ELECTRICAL SPECIFICATIONS | ||||
| Power Supply: | +24 Vdc or PoE | |||
| Power Consumption: | < 80 mA operating, < 200 mA during power-up cycle | |||
| Operating Frequencies: | HF | NFC: 13.56 MHz | |||
| Operating Distance: | up to 5 cm* | |||
| Reader IC: | CL 663 | |||
| RF TX Speed: | up to 848 kBd | |||
| Antenna: | Internal, or external via SMA connector* | |||
| Antenna Baudrate: | 9600…115200 bit/s, 115.200 bits/s default | |||
| Interface: | Ethernet | |||
| Trigger Input: | Opto-coupler, 10 mA, internal series resistor, apply +24 Vdc to trigger | |||
| Connectors: | M12 socket, 5 pin, A-coded | RJ45 Socket (Ethernet) | |||
| Signal Output: | High-Side switch, 25 V max, 20 mA | |||
| MECHANICAL SPECIFICATIONS | ||||
| Dimensions: |
80 × 82 × 55 mm
|
|||
| Material: | ABS | |||
| Weight: | 230 g | |||
| ENVIRONMENTAL CONDITIONS | ||||
| Operating Temperature: | CR- (Chloropren) seal: -40 °C to +60 °C | |||
| Surface Resistance: | 4×1014 Ohm, IEC 60093 | |||
| Humidity: | 5 % – 95 % RH (Non-condensing) | |||
| MTBF: | 200‘000 h | |||
| IP Protection Class: | IP67 | |||
| SUPPORTED STANDARDS | TAGS | ||||
|
ISO 14443 A and compatible:
|
Read/Write:
MIFARE® Classic Mini / 1K /4K, MIFARE Ultralight ®, MIFARE Ultralight® C, MIFARE®
DESFire®EV1, MIFARE® Smart MX, MIFARE® Plus S / X, MIFARE® Pro X, NTAG 21x Read UID only: Read UID only of all other ISO14443A RFID tags
|
|||
|
ISO 14443 B and compatible:
|
SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176
|
|||
|
ISO 15693 and compatible:
|
EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx
|
|||
|
ISO 18000-3M3/ EPC HF Gen2:
|
I-Code ILT-M
|
|||
|
HID iClass:
|
Read UID
|
|||
| APPLICABLE STANDARDS | ||||
| EMC: | EN 301489-1:2012-04 (v1.9.21), EN 301489-3:2013-12 (V1.6.1) | |||
| Radio Regulation: | EN 300330-1:2015-08 (V1.8.1), EN 300330-2:2015-08 (V1.6.1) | |||
| Safety: | EN 60950-1:2014-08, EN 62369-1:2010-03, EN 50364:2010-11 | |||
| RoHS: | EC Guideline 2011/65/EU and amendment 2015/863, EN 50581:2012 (valid till 2024-07-07), EN 63000:2018 | |||
| REACH: | EU Guideline 1907/2006, updated by 2018/2005/EU | |||
| SDK INFORMATION | ||||
|
Supported OS:
|
Windows XP, Vista, 7, 8, 8.1, 10
|
|||
| Supported Languages: | Binary ASCII command protocol, VS2005 C++Library | |||
| Demo Software: | Windows | |||
*Reading Distance depends on Tag, Antenna and Environmental Conditions.
► RFID READER FOR QUALITY CONTROLS
The RFID Reader HF IP67 is a compact RFID Reader and Writer. It is suitable for the integration into existing systems within Quality Controls in Productions, Industry 4.0 Environments or for Data Exchange with NFC.
► QUALITY CONTROL WITHIN PRODUCTIONS
Machines in production require a clear message for the various process steps. The RFID Reader HF IP67 from iDTRONIC takes into account the most diverse quality requirements in the context of production. Quality aspects such as material properties require a valid check. Compliance with standards is an essential part of quality control.
► OPTIMAL FOR NEAR-FIELD ENVIRONMENTS
RFID Reader HF IP67 is equipped with the RFID Frequency HF/NFC (13.56 MHz). It supports transponders and Tags with Standard ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2 and HID iClass. The antenna integrated in the module transmits data at a speed of up to 115,200 bits per second. Optionally, the RFID Reader is available with an external SMA Antenna Connector.
► CONNECTIVITY OPTIONS FOR INDUSTRIAL PROCESSES
The industrial Ethernet connection offers the possibility to connect the device to many end devices with RJ45 interface.
Power can be supplied either by the Ethernet RJ45 or the M12 connector.
► SUPPORTS ALL CURRENT WINDOWS SYSTEMS
The RFID Reader supports all current Windows systems.
The supplied Software Development Kit is designed for installation into your Windows systems.
► Demo Software Introduction:
► Application Areas
 |
Automation Processes | |
 |
Quality Controls | |
 |
NFC & Mobile Applications |
Or contact us via our contact form: