EMBEDDED UHF  MODULE

UHF Embedded Module – M620

Highlights

  • Based on the latest generation Impinj E710 chipset

  • EPC C1 GEN2 | ISO 18000-63

  • 33 dBm RF power output

  • Outstanding reading rate

  • UART – TTL

  • Metal housing for heat dissipation

EMBEDDED UHF  MODULE

UHF Embedded Module – M620

Highlights

  • Based on the latest generation Impinj E710 chipset

  • EPC C1 GEN2 | ISO 18000-63

  • 33 dBm RF power output

  • Outstanding reading rate

  • UART – TTL

  • Metal housing for heat dissipation

The iDTRONIC RFID Embedded UHF Module M620 is a high-performance UHF RFID module based on the IMPINJ E710 New Generation RF chip. This is an ultra-high frequency RF reader and writer chip with high sensitivity and long range reading distances combined with low power consumption and excellent performance. The RFID module was developed for the integation into RFID handheld devices, mobile applications or portable PCs.

It is equipped with UHF Technology EPC C1 GEN2 | ISO 18000-63 and is globally applicable with a frequency band of 840 – 960MHz. The M620 UHF module e has a MMCX antenna interface that supports a power output of max. 33 dBm, which enables it to rapidly read multilabels at up to 900 tags per second.

iDTRONIC’s hardware comes with an useful SDK for the development of controller, Linux or Windows based applications. In addition to documentation, command protocols and source codes, the SDK includes a Windows based demo application providing full functionality over all supported UHF RFID standards.

Application areas

  • Printer applications
  • Stationary readers
  • Production machines

RADIO SPECIFICATIONS
Operating Frequency 840…960 MHz, Configurations
for USA: 902…928 MHz (FCC), EU:
865…868 MHz (ETSI)
RFID IC Impinj E710
RF TX Power +5…33 dBm, adjustable in steps of 1 dB
RF Sensitivity -87 dBm
RF Channel Isolation 32 dB
Reading Range Up to 9 meters*
RF Impedance 50 Ω
Antenna 1 MMCX connector for external
antenna

ELECTRICAL SPECIFICATIONS
Power Supply 3.6…5 Vdc
Power Consumption 1300 mA @ +33 dBm TX Power
50 mA Standby
0.05 mA Power Down Mode
Connectors S12 pin SFW12R-1STE1LF connector
Solder Joints
Communication Interface UART TTL port
Baudrate 9600…921600 bit/s, 115200 bits/s
factory default
GPIO
  • 2 Inputs TTL Levels: Logic low: < 0.8 V, minimum 0V Logic high: > 2 V, maximum 3.3 V
  • 2 Outputs TTL Levels: Logic low: maximum 0.4 V, Logic high: minimum 2.9V, maximum 3.3V
  • IO: The maximum output current of the port is 5mA

MECHANICAL SPECIFICATIONS
Dimensions 55.9 × 35.6 × 6.5 mm
Weight 25 g
Material Aluminium

ENVIRONMENTAL CONDITIONS
Operating Temperature -25 °C … +65 °C
Storage Temperature -40 °C … +85 °C
Humidity up to 95 %, non-condensing

SUPPORTED STANDARDS / TAGS
ISO Standard ISO 168000-63 (EPC Class 1 Gen 2)
Read Rate ≥ 900 tags/s
Tag Cache ≥ 1000 Tags @ 12 Bytes EPC size

SDK INFORMATION
Supported OS Windows, Linux, Android
Supported Languages C, C#/.NET, Java
Demo Software Windows

Other functions and details to be continued and upgraded.

Datasheet                                       Download                                      
SDK Download Link                                       Download                                      
The iDTRONIC RFID Embedded UHF Module M620 is a high-performance UHF RFID module based on the IMPINJ E710 New Generation RF chip. This is an ultra-high frequency RF reader and writer chip with high sensitivity and long range reading distances combined with low power consumption and excellent performance. The RFID module was developed for the integation into RFID handheld devices, mobile applications or portable PCs.

It is equipped with UHF Technology EPC C1 GEN2 | ISO 18000-63 and is globally applicable with a frequency band of 840 – 960MHz. The M620 UHF module e has a MMCX antenna interface that supports a power output of max. 33 dBm, which enables it to rapidly read multilabels at up to 900 tags per second.

iDTRONIC’s hardware comes with an useful SDK for the development of controller, Linux or Windows based applications. In addition to documentation, command protocols and source codes, the SDK includes a Windows based demo application providing full functionality over all supported UHF RFID standards.

Application areas

  • Printer applications
  • Stationary readers
  • Production machines

RADIO SPECIFICATIONS
Operating Frequency 840…960 MHz, Configurations
for USA: 902…928 MHz (FCC), EU:
865…868 MHz (ETSI)
RFID IC Impinj E710
RF TX Power +5…33 dBm, adjustable in steps of 1 dB
RF Sensitivity -87 dBm
RF Channel Isolation 32 dB
Reading Range Up to 9 meters*
RF Impedance 50 Ω
Antenna 1 MMCX connector for external
antenna

ELECTRICAL SPECIFICATIONS
Power Supply 3.6…5 Vdc
Power Consumption 1300 mA @ +33 dBm TX Power
50 mA Standby
0.05 mA Power Down Mode
Connectors S12 pin SFW12R-1STE1LF connector
Solder Joints
Communication Interface UART TTL port
Baudrate 9600…921600 bit/s, 115200 bits/s
factory default
GPIO
  • 2 Inputs TTL Levels: Logic low: < 0.8 V, minimum 0V Logic high: > 2 V, maximum 3.3 V
  • 2 Outputs TTL Levels: Logic low: maximum 0.4 V, Logic high: minimum 2.9V, maximum 3.3V
  • IO: The maximum output current of the port is 5mA

MECHANICAL SPECIFICATIONS
Dimensions 55.9 × 35.6 × 6.5 mm
Weight 25 g
Material Aluminium

ENVIRONMENTAL CONDITIONS
Operating Temperature -25 °C … +65 °C
Storage Temperature -40 °C … +85 °C
Humidity up to 95 %, non-condensing

SUPPORTED STANDARDS / TAGS
ISO Standard ISO 168000-63 (EPC Class 1 Gen 2)
Read Rate ≥ 900 tags/s
Tag Cache ≥ 1000 Tags @ 12 Bytes EPC size

SDK INFORMATION
Supported OS Windows, Linux, Android
Supported Languages C, C#/.NET, Java
Demo Software Windows

Other functions and details to be continued and upgraded.

Datasheet: Download

SDK Download Link: Download

This might also interest you

UHF Embedded Module – M600

UHF Embedded Module – M650

This might also interest you

UHF Embedded Module – M600

UHF Embedded Module – M650

Do you have any questions about our products?

Get in touch with us. We will be happy to help you with any questions you may have about our products. Our RFID experts look forward to hearing from you and will be happy to help you further by phone or e-mail.

Patrick Kochendörfer

Patrick Kochendörfer
– Sales Director –

  • Tel.: +49 621 66900 94-21

Do you have any questions about our products?

Get in touch with us. We will be happy to help you with any questions you may have about our products. Our RFID experts look forward to hearing from you and will be happy to help you further by phone or e-mail.

Patrick Kochendörfer

Patrick Kochendörfer
– Sales Director –

  • Tel.: +49 621 66900 94-21